T-Lock™ Leveling System

This levelling system was developed to bring a perfect installation for all surfaces covered with tiles. This system ensures that your tile installation will be leveled on the point tile to tile (each tile is leveled by all tiles around it). It also prevents tiles from warping as your thinset cures. An advantage to using this system is that the process of laying tiles takes less time, as you do not have to level your tiles the traditional way. For those who are uncomfortable around tools, there is a way of achieving perfectly level surfaces with the Perfect Level Master system. Wedges and clips are included as part of this system. This installation method makes it ideal for do-it-yourselfers because it requires no complicated tools.

  • Durable clips, reusable wedges
  • Various sizes available
    •         1mm (1/32")
    •         2mm (1/16")
    •         3mm (1/8")
  • Patent Pending


Online Store

How to use the T-Lock™ Tile Leveling System


After having spread the adhesive, remove excess mortar from tile edges using trowel and insert the clips underneath. Depending on the size of the tile, set one or more supports on every side.

Insert the wedge in the clip’s support slot. Two clips and two wedges are recommended per square foot.

To facilitate tile leveling, the use of special adjustable pliers is recommended, although not required.

After adhesive is set, remove the clips. You may use a rubber mallet or simply kick them out. To ensure a clean breaks follow grout lines.

You May Also Like:

© Copyright 2014 - Perfect Level Master.